Category: Baserunning
Type: Drill
BELT
Resistance Drills Equipment required: A belt and a short length of rope (about 10-12 feet long).
Put the belt around the waist of a runner and tie the rope to the back of the belt. Have another player grasp the rope and stand behind the runner with the rope taut. Have the runner lean forward while the other player holds the rope to keep her from falling. The proper running position is at about a 5-10 degree angle off vertical with her feet pointing forward, the back foot about 6 inches behind and 6 inches to the right (or left) of the lead foot. With the help of the rope holder, have the runner get into her running position and when she is, say "GO".
The runner runs about 10 yards with the rope holder applying resistance. You do not want too much resistance, just enough to keep the runner in the proper running position. Do this 2 times then have the runner "free" sprint over the same distance while the rope holder is putting on the belt. Then switch positions.
This drill was acquired acquired from a "Speed and Quickness" clinic in Phoenix by Don Lee
Submitted by: Coach Mike
|
|
|
