Bayshore Athletic Association: Equipment CHECK

APPROVED BATS FOR 2013:
To follow up our previous correspondence and information posted on the Babe Ruth League website, the following details on all baseball bats approved by Babe Ruth League, Inc. for 2013 local league and tournament play. Such descriptions are included as part of the 2013 Babe Ruth League Rules and Regulations.

CAL RIPKEN BASEBALL DIVISION
The bat may not exceed 33"in length, and the bat barrel may not exceed 2¼" in diameter. Only 2¼" barrel non-wood bats marked BPF 1.15 will be allowed. Wood 2 ¼" barrel bats are allowed.

13-15 BASEBALL DIVISION
The bat may not exceed 34" in length, and the bat barrel may not exceed 2 5/8" in diameter. All aluminum/alloy barrel bats and all composite handle (only) aluminum/alloy barrels are allowed. Only composite barrel bats certified and marked BBCOR .50 will be allowed. Wood barrel bats conforming to the specifications of Official Baseball Rule 1.10 are allowed.

16-18 BASEBALL DIVISION
The bat may not exceed 34" in length and the bat barrel many not exceed 2 5/8" in diameter or be greater than a -3 length to weight ratio. Only metal/composite bats certified and marked BBCOR .50 are allowed. Wood barrel bats conforming to the specifications of Official Baseball Rule 1.10 are allowed.

NON-COMPLIANT BATS FOR 2013:Contained below is a current listing of non-compliant bats that are not eligible, or approved, for use in any Babe Ruth/Cal Ripken Baseball program or activity.* Babe Ruth League, Inc. has been informed that Nike Bat Model #Aero CX2-BTO636 (light grey), CX2-BTO573 (dark grey) and CX2-BTO598 (blue)have failed recent performance standard compliance testing. Effective immediately and until further notice, Nike Bat Model #Aero CX2-BTO636 (light grey), CX2-BTO573 (dark grey) and CX2-BTO598 (blue), including all graphic variations, is not eligible, or approved, for use in any Babe Ruth/Cal Ripken program or activity.* The National Collegiate Athletic Association (NCAA) has advised Babe Ruth League, Inc. that the BBCOR decertification process has been implemented for the following bats: Marucci CAT-52 33-inch model, CAT-52 34-inch model, and Black 33-inch and 34-inch models
Reebok Vector-TLS 33-inch model* Babe Ruth League, Inc. has been informed that Louisville Slugger TPX Dynasty -12, (black/red/grey) composite bat has failed recent performance standard compliance testing.Effective immediately and until further notice, Louisville Slugger (Hillerich & Bradsby) TPX Dynasty bat (Model - YB12D -- (black/red/grey) including all graphic variations, is not eligible, or approved, for use in any Babe Ruth/Cal Ripken program or activity.* Babe Ruth League, Inc. has been informed that Mattingly Sports, Inc., Balistk (blue) composite bat has failed recent performance standard compliance testing.Effective immediately and until further notice, Mattingly Sports, Inc., Balistk bat (Model - BTKYB, blue) including all graphic variations, is not eligible, or approved, for use in any Babe Ruth/Cal Ripken program or activity.Effective immediately and until further notice, the bats listed above are not eligible, or approved, for use in any Babe Ruth/Cal Ripken program or activity.

How to Measure Baseball Gloves
Fielders gloves and first base mitts are measured by starting at the top of the index finger of the glove down the finger along the inside of the pocket and then out to the heal of the glove.  A flexible tape measure has to be used, not a stiff ruler. Measure from the highest point on the glove (normally the index finger). Lay the tape measure across the palm of the glove, so that it folds across and into the indenture, down to the heel of the glove.

 Break-In
Most manufacturers agree that a glove oil or leather conditioner cream should be used as long as it does not contain silicon. Most manufacturers recommend not using anything that requires a microwave or an oven.  

Youth Gloves
Youth baseball gloves and mitts typically are designed to be easy to break-in and will sometimes have a notch in the heel to help the glove break-in correctly. These gloves are usually designed with smaller finger and wrist openings to better fit smaller hands, and often have oversized pockets to aid youngsters learning how to catch.                                                     

Open vs Closed Web
For most positions, an open web vs a closed web is a matter of personal preference. Open web gloves tend to trap the ball a little better than closed web gloves. Closed web gloves tend to get the ball out of the pocket a little quicker. First and Third base players tend to prefer open web gloves. Middle infielders tend to want closed web gloves to help.                                

Conventional Back vs Closed Back
Conventional (open) vs closed back is mainly a matter of style and personal preference. Conventional back gloves tend to be a little lighter and can fit a bit tighter in the wrist. Some closed back gloves have straps with Velcro that allow you to adjust how tight or loose the glove fits.                                                                                                             

Size
Select a glove for the position you will be playing most often. Use the chart at the top of this page as a general guideline for determining glove size. A glove should feel fairly snug when adjusted. Check to make sure the glove adjusts to your hand. Allow room for batting glove if you wear one. Except for pitchers, most players should wear a batting glove inside their fielders glove. The batting glove will absorb most of the sweat from your hands, thus protecting the lining of your glove. Change the batting glove when it gets wet or rotted.                                                                                                        

Breaking In A New Glove – Apply a small amount of Glove Oil in the triangular area shown. Rub it into the leather until most of it has been absorbed, then wipe off the excess with a soft towel. Next, fold the glove at the hinge and exercise that area a bit. Then, fold the glove and squeeze the fold so that a crease can be formed along the triangle line from the index finger side to the hinge. After setting this crease, re-fold the glove and form a similar crease from the thumb side of the triangle to the hinge. The final step is to re-fold the glove so a crease can be formed from the center of the web crotch to the hinge. When finished with these steps you should be able to see three distinct creases fanning out from the hinge to the web crotch. After completing these steps (about 20 minutes) put the glove on your hand and close it a few times. You should be able to feel a difference in the way the glove responds. Repeat this procedure in a few days, but do not use the glove oil in excess.       

Caring For Your Glove - The most important part of caring for your glove is to recognize that leather will deteriorate if subjected to repeated exposure to moisture and heat. Saliva will also result in damaged leather, so Don't Spit In Your Glove. Leaving your glove out in the weather will ruin it, as will putting it away wet from perspiration. Always wear a batting glove under your baseball glove (except for pitchers) - this absorbs the sweat from your hand. When your batting glove gets wet, change it. This will add years to the lining of your glove. When your glove gets wet, dry it with a towel or soft cloth, and leave it exposed to room air for a few hours until the lining is dry. After it dries, use a little glove conditioner to moisten the leather. When you put your glove away, put a softball in the pocket and wrap it with a wide rubber band.